STROKER ENGINE - CRATE MOTOR - STROKER KITS - NC CUSTOM STROKER ENGINES
Technical Specs
- Engine Model - 427 R-1
- Horsepower - 630 HP
- Torque - 575 Ft Lbs
- Bore and Stroke - 4.125 x 4.000 Inches
- Compression Ratio - 12.5:1
- Fuel - Race Gas
- Crankshaft - 4340 Forged Steel (two piece rear seal)
- Connecting Rods - 6.0 Inch Forged H Beam, bushed
- Pistons - Forged
- Rings - File fit plasma moly
- Block - New Dart Iron
- Camshaft - Solid roller
- Lifters - Solid roller
- Timing Set - Comp Cams belt drive
|
- Harmonic Balancer - Professional Products
- Oil Pump - Melling standard volume
- Oil Pan - Stock style chrome
- Heads - Ported Aluminum
- Head Bolts - ARP
- Springs - Dual with dampner
- Rocker Studs - ARP 7/16 diameter screw in type
- Rocker Arms - Aluminum full roller, 1.6 ratio
- Pushrods - 5/16 Hardened steel with guide plates
- Intake Manifold - Aluminum open plenum
- Valve Covers - Chrome stamped
- Spark Plugs - Autolite AR 3922
- Oil Filter - Fram PH5 or comparable
- Ignition Timing - 30-34 degrees at 4,000 RPM
- Oil Type - Mineral based
|
Labor Details
- All parts hand cleaned
- Block sonic checked for thickness
- Block pressure tested @ 40 psi
- Block stroker clearanced
- Block square decked with BHJ fixturing
- Oil gallies tapped for screw in plugs
- Aligned honed mains
|
- Bored and honed with torque plates
- All clearances checked to the nearest .0001"
- Rotating assembly balanced
- Engine blueprinted with specs sheet on file
- Engine fully dressed to customer specifications
- Dyno tested with actual results supplied to customer
|
Upgrade Options
- Jesel Shaft Mounted Rockers - $595
|
- Other Upgrades Available. Please Call or Email For Pricing.
|
Turnkey Options
- Custom Built Holley Carburetor by AED - Included
- MSD Distributor - Included (box required at additional price)
- MSD 6AL Ignition Box - $220
- 8mm Custom Fit Spark Plug Wires and Looms -Included
- Aluminum Water Pump (short or long)- $99
- Ignition Coil - $42
|
- SFI Approved Flexplate (auto trans) - $69
- SFI Approved Flywheel (manual trans) - $199
- Centerforce II Pressure Plate - $189
- Centerforce II Clutch Disc (10 or 26 Spline) - $89
- Mini Starter - $149
- If we are missing something you are looking for, call or email for a free quote!
|
T AND L ENGINES, IN CONJUCTION WITH PRESTIGE MOTORSPORTS, CAN NOW OFFER A COMPLETE PACKAGE FOR YOUR VEHICLE INCLUDING TRANSMISSIONS, ENGINE MOUNTS, HEADERS, RADIATORS AND MUCH MORE.
CONTACT US FOR MORE DETAILS!
